;)
HH
Overview
These pumps have better life in acidic water. Better surface finish promises better efficiency and consistent performance. These pumps have better life in sandy water. These are widely used in fire fighting application, continuous water supply for farming, irrigation, water supply for industry and housing complex and so on.
Feature
PUMP:
Higher head per stage resulting in achieving same head with less no of stages
Stainless steel pump internals
Better surface finish hence better efficiency and consistent performance
Lesser weight and lesser height resulting into ease in installation and transportation
Better life in sandy water application
Better life in acidic water
Rust free water
Aesthetically appealing
Loading on pipes improves
CED coating cast iron components long life & rust free
MOTOR:
Withstand wide voltage fluctuations from 200 volts to 440 volts with marginal variation in head and discharge
Even at low voltage, pump delivers water
For longer life Teflon Carbon Thrust bearing
Better protection against sand
Application
Water supply for Industrial, Housing complex, Hospitals, Commercial Complex, Cinema Halls, Multiplex, Community Supplies, Building & Construction application
Continuous water supply for farming application & irrigation projects
Fire fighting application
Specification
Head 1 to 447 meters
Discharge 740 to 30 LPM
Motor Rating 2.2 kW to 15 kW(3 Hp to 20 Hp)
Bore well Size 150 mm(6")
Voltage Range 200V to 440 V
KS3
Overview
Lightweight, compact and energy efficient, this pump is also quite easy to install.
Feature
Low power consumption
Designed for optimum efficiency
Light weight and compact size make it easy to install
Suitable for minimum 80 mm Bore Diameter
Minimum submergence required 1 meter
Declared performance is against power supply 1Phase 200V AC at 50 Hz
Suitable for non corrosive water < 35 °C
Suitable for < 50 ppm of suspended solids
Application
Domestic and industrial water supply
Sprinkler and drip irrigation system
Booster systems
Farmhouse, nurseries and gardens
Specification
Technical Specifications
Head : 8 to 59 Meters
Capacity : 68 to 8 LPM
Rating : 0.37 to 0.93 KW (0.50 to 1.25 HP)
Voltage : 160 to 240 V (Single Phase )
Material of Construction
Shaft : Chrome Steel (Grade AISI 410)
Impeller : Noryl (20% Glass Filled)
Diffuser : Noryl (20% Glass Filled)
NRV Body : Cast Iron (Grade FG 200)
Bushes : Bronze (TB 4)
Rotor : Copper (Electrolyte Grade)
KS4
Overview
is multi-utility pump features a stainless steel motor body which is easily rewound.
Feature
Can withstand wide voltage range from 160 to 240 V for single phase and 280 to 440 V for three phase
SS motor body
Motor easily rewound
Less vibration and lower noise level due to dynamically balanced rotating parts
More hygienic operations make it suitable for drinking water applications
Fitted with mechanical seal
Application
Domestic and industrial water supply
Firefighting systems for small and medium size plants
Sprinkler and drip irrigation systems
Booster systems
Farmhouses, nurseries and Gardens
Specification
Technical Specifications
Head : 5 to 345 Meters
Capacity : 6 to 420 LPM
Rating : 0.37 Kw/ 0.5 HP to 4.1 Kw / 5.5 HP
Voltage Range : 1 Phase (180 to 240) 3 Phase (280 to 440)
Material of Construction
Pump Housing : Stainless Steel
NRV : Cast Iron
Suction Housing : Cast Iron
DOL : Cast Iron
Impellers : Noryl
Diffusers : Noryl
Strainer : Stainless Steel
Diffuser Casing : Stainless Steel