The machine is designed for portability, operating convenience and accuracy. It is a compact and self contained. Unit ideally suited for mobile and field laboratories.
Specimens upto 15cms cubes and 15 cms dia x 30 cms high cylinders can be accommodated. Load measurement is done by a 15 cms dial bourdon tube type hydraulic pressure gauge calibrated in 100 divisions, fitted with a maximum pointer (lagless pointer). The machine is of Channel construction, giving excellent lateral rigidity. The hydraulic loading unit is located on the base of the loading machine. The hydraulic jack is precision machined. The piston and cylinder are ground and lapped to fine tolerances. The lower platen can be centrally located on the base, and has concentric grooves for centering the specimen. Spacer is provided to test small specimens. The upper platen is mounted on a swivel arrangement for self aligning action. The pump is fitted integral on the testing machine along with oil reservoir. The hand operated pump is of two speed concentric piston type.
The load frame is of four column construction with a fixed upper head holding the ball seated platen. The testing of concrete cubes upto 15cm.
Load gauge is calibrated in kilonewtons and is fitted with a maximum load pointer.
Load capacity – 100 / 150 / 200 Tons
200 Tons, Channel type, welded, electric-cum hand operated with single gauge
Head Plate Size :12” x 17” x 4”
Base Plate Size : 12” x 17” x 2.5”
Between platen Size : 9” x 9” x 2”
9” x 9” x 1.5”
Vertical Clearance between plate : 14.5”
Horizontal Clearance between column : 10.625”
Ram dia : 205mm
Complete set with single pressure gauge (manufacturer’s calibration) & fitted with motor 440 V