;)
Compression Testing Machine 2000 kN (Electrically Operated)
It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine meets the essential requirements of various Indian, British & American standards for compression tests.
Loading Unit : The hydraulic jack of 2000 kN capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen.
Pumping Unit : The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with three gauges, 2000kN x 10kN, 1000kN x 5kN and 500kN x 2.5kN respectively. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability.
Head Plate Size :12” x 17” x 4”
Base Plate Size : 12” x 17” x 2.5”
Tie Rod : 2.5” dia
Between platen Size : 9” x 9” x 2”
9” x 9” x 1.5”
Vertical Clearance between plate : 14.5”
Horizontal Clearance between column : 10.625”
Ram dia : 205mm
Complete set with three pressure gauge & fitted with motor 440 V