DIGITAL WELDING INVERTER - MIG

Mobile:

View :

413

Manufacturing Country :

Thane

Product Description

Swastik Weld series welding machines are sophisticated IGBT based inverters with total digital control having wide current range. Swastik Weld is designed to meet varied requirement of the welding industry with MIG welding inverters for 160A, 250A and 400A range. Advanced micro controller technology enables Swastik Weld to have excellent soft start, digital display for both current and voltage, both 2T and 4T operations. Separate wire feed units can be mounted on the inverter or taken to work location with longer interconnection cables for added flexibility to the welder.

IGBT BASED SOLID STATE INVERTER DESIGN: Latest technology used for full bridge topology to ensure reliable, superior weld control every time.

PORTABLE: It is very portable, provided with Castor Wheels (basic inverter). Operator can move from one place to another place without any difficulty.

THERMAL OVERLOAD PROTECTION :

Reliable thermal shutdown mechanism in place, in case of overuse or blockage in airflow.

FAN AS NEEDED :

Swastik Weld automatically operates the fan as needed, reducing the noise, power consumption and the airborne contaminates pulled through the machine.

ADAPTIVE SOFT START: Swastik Weld ensure the wire feed speed is automatically controlled from a slow start to the set wire speed.

Tail Voltage levels to eliminate globule formation at the end of wire and gives clean start each time.

SINGLE INCREMENT RANGE: Digital front panel allows the operator to set the current and voltage is required in single increment also.

SAFE AND RELIABLE: Low OCV and protection against prolonged Output Short, IGBT Over Current, IGBT Short Circuit Current, Welding Over Current, Thermal Overload.

POWER FLUCTUATION COMPENSATION: Power source does not get affected and it remains constant regardless of fluctuation in input power + 15%. It is suitable especially for the Indian Industry.

VERSATILE: Swastik Weld can weld using welding wire sizes from 0.6mm to 1.60mm.

PROCESS MEMORY RECALL : Swastik Weld ensures faster setup time between processes and on each power on by remembering the settings for each and every process individually.

ENERGY SAVING MODE: When operator is not welding for 2 minutes, then welding inverter in Manual / Stick mode goes into energy save mode, enabling saving of unwanted energy loss.

EXTERNAL WIRE FEEDER: Compact and portable external wire feeder with 2 x 2 feed roll mechanism to guarantee study uninterrupted wire feeding.

MODEL	UNIT	MIG 160	MIG 250	MIG 400
POWER SOURCE
Supply Voltage	VAC	230 V + 15 %	415 V + 15 %	415 V + 15 %
Phases	No.	1	3	3
Frequency	Hz	50 + 4%	50 + 4%	50 + 4%
Input Power:	KVA	4.8	7.5	12
OUTPUT
Characteristics	Type	CV	CV	CV
Open circuit voltage	V	150 % of set Voltage	150 % of set Voltage	150 % of set Voltage
Output voltage (During Welding	V	14 to 25	14 to 32	14 to 38
PROTECTIONS
Thermal Overload Provided Single Phasing Provided Under Voltage Provided Over Curernt		YES YES YES YES	YES YES YES YES	YES YES YES YES
GENERAL
Cooling	Type	Forced Air	Forced Air	Forced Air
Insulation	Class	F	F	F
Dimensions (approx) :
Length	mm	560	625	625
Width	mm	280	320	320
Height	mm	510	570	570
Weight (approx.)	Kg.	36	46	51
WIRE FEEDER
Wire Feed Speed	Mtr/Min	1.2 to 13	1.2 to 13	1.2 to 13
Wire Diameter Range Solid	mm	0.8	0.8 & 1.2	0.8 , 1.2, 1.6
Wire Diameter Flux Cored	mm	-	1.2	1.6
Wire Diameter Aluminium	mm	-	1.2	1.6
Wire Drive System	Type	2 Roll Quick Release	2 Roll Quick Release	2 Roll Quick Release
Weight (approx.)	Kg.	12	12	15
TORCH (TBI GERMANY)
Max. Current @ 60%	Amps	160	250	400
Cable Length	Mtr	3	3	3
Cable Type	Type	Co-axial	Co-axial	Co-axial
Wire Diameter Range Solid	mm	0.8	0.8 & 1.2	0.8 , 1.2, 1.6
Type of end Connector	Type	Euro	Euro	Euro

DIGITAL WELDING INVERTER - MIG

Mobile:

Fill the form and Get the Quote