DESCRIPTION
MASTER FLOOR-HD is a high performance epoxy resin based concrete that provides a rough looking extremely strong bedding mortar or screed mortar to industrial floors.
ADVANTAGES
1) Abrasion resistant and hard wearing.
2) Slip resistant.
3) High Strength.
4) Easy to handle.
5) Resistant to chemicals and aggressive
substances.
TYPICAL PROPERTIES
Density |
2000 kg/m3 |
Pot Life |
45 min at 250C |
Shelf Life |
6 months |
Compressive strength |
65 n/mm2 |
Tensile strength |
12 n/mm2 |
Flexural strength |
28 n/mm2 |
COVERAGE
MASTER FLOOR-HD covers 0.50 sq. ft. to 1.50 sft per kg. depending upon the thickness of the screed
DIRECTIONS FOR USE
Surface preparation :
As with all epoxy resin systems, surface preparation is of prime importance. For concrete surfaces, remove all grease, oil, dust, laitence, etc. Ensure substrate to receive the screed is sound, cut back to sound surface wherever necessary.
Primings :
Remove dust and ensure that all the surface is dry. Prime with MASTER PRIME-CN
Mixing :
Do not split packs or alter the components in any way. Mix in a suitable mechanical pan type resin mixer. Thoroughly mix both liquid components together prior to the addition of the aggregate component. Remix until the aggregate is completely dispersed.
PACKING
MASTER FLOOR-HD is supplied in 10 kg pre weighed units and in bulk.
Application
Tip or apply the mixed MASTER FLOOR-HD onto the primed surface - the primer must still be fully tacky. Rake or spread out to the thickness required compact and finish with a steel trowel.
SPECIFICATION CLAUSE
MASTER FLOOR-HD shall be laid on suitable prepared surfaces where indicated. MASTER FLOOR-HD is manufactured to the following specifications.
Composition |
3 component solvent free epoxy resinbased system filled with aggregates. |
Density |
2000 kg/m3 |
Compressive strength |
65N/mm2 |
Tensile strength |
12N/mm2 |
Flexural strength |
28N/mm2 |
Chemical Resistance |
Excellent - to a wide range of chemicals, oils, etc. |
HEALTH AND SAFETY
Epoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of day's work all the packing material should be burnt and buried.
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.