Epoxy Resin Based Mortar

DESCRIPTION
MASTER FLOOR-SL is a three components epoxy resin based mortar for application to a variety of subfloors as a jointless, thin, self-levelling topping. MASTER FLOOR-SL quickly provides a permanent, hard wearing chemical resistant finish for floors and corridors subject to pedestrian and light wheeled traffic. It provides a smooth, hygienic and dust free floor that can be easily cleaned.

PRIMARY USE
To provide a seamless, hygienic, self-levelling floor topping for areas subject to pedestrian and light wheeled traffic.

TYPICAL APPLICATIONS
MASTER FLOOR-SL self-levelling floorings are designed for use in : Operation Theatres Agricultural Buildings, Factories, Laboratories, Bakeries, Supermarkets, Showrooms, Bottling Plants, Power Stations, Wear Houses, Breweries, Garages, Machine Shops, Chemical Plants, Dairies, Hospitals, Refineries, Subways, Sewage treatment Plants, and many other industrial and commercial applications.

ADVANTAGES
1) High Compressive, flexural and tensile strengths in excess of concrete.
2) Available in range of attractive colours Brown, Green,Blue, Grey, etc.
3) Chemical Resistant and waterproof
4) Hygienic and non-dusting
5) Easy to use, easy to clean
6) Epoxy based, supplied in pre-weighted units
7) Will not support bacterial growth.

TYPICAL PROPERTIES

<div style="\&quot;clear:" both;\"=""> 

CHEMICAL RESISTANCE
MASTER FLOOR-SL has excellent resistance to the following chemicals: Hydrocarbon solvents, Oils & Fats, Diesel, Fuel and Petrol. Sugar solutions and salts.

COVERAGE
2 - 4 sq. ft per kg at 3 to 1.5 mm thickness

DIRECTIONS FOR USE
Preparation of Sub - Floor :
Floors should be dry, clean and free of laitence, dust, greases, paint, bitumen, etc. Concrete should have low moisture content, be degreased, and if necessary acid itch, wash and leave it to dry.

Application :
Apply masking tape to borders of the floor to achieve straight edges, Use MASTER PRIME-CN as a primer. Lay MASTER FLOOR-SL after one or two hours. Pour part of the mixed material on to floor and trowel in. Pour remainder on to this area and trowel to desired thickness. Retrowel to remove air bubbles.
Where a non-slip surface is required, the uniform broadcasting of non-skid granules such as silicon carbide on to the MASTER FLOOR-SL before it has completely hardened is suggested.

PACKING
It is supplied in 5 kg & 10 kg pre weighted units.

HEALTHY AND SAFETY
Epoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of day's work all the packing material should be burnt and buried.

QUALITY ASSURANCE

All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification.  Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.

 STATEMENT OF RESPONSIBILITY

Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue.  The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.