INTELLIGENT BATTERY TESTER
Manufacturing Country :
Mumbai
|
(HRD TEST ON LEAD ACID TYPE BATTERIES)
|
|
|
Constant Current fixed time on field Discharge Testing
|
|
|
| |
|
|
|
SALIENT FEATURES :
|
|
- Self Powered
- Operates without disconnection of batteries with inverter / UPS
- Compact and Light Weight - Portable
- Resistive Constant Current, time based discharge.
- The result of battery test is available in few seconds
The HRD family equipment is designed for high rate discharge testing of automotive and commercial 12 volt batteries. Using Swastik exclusive HRD Tester, the operator can perform a short test on each battery to find defects such as poor / open welds, sulphated batteries. Setting available with discharge currents of 15, 30, 45 and 60 amps. Unit is air cooled with a fixed resistor and load switching.
|
|
|
|
|
IT IS ASSUMED THAT THE BATTERY UNDER TEST IS FULLY CHARGED
|
INPUT SPECIFICATIONS
|
OUTPUT SPECIFICATIONS
|
|
Nominal Voltage: 12VDC
AH Range (manual select):
1. 20 - 200 AH in four steps
|
Nominal Voltage: 12VDC
Discharge Current in steps of 15A:
1. 15A (20 - 50 AH)
2. 30A (51 - 100 AH)
3. 45A (101 - 150 AH)
4. 60A (151 - 200 AH)
|
| |
VISUAL INDICATIONS
LED's Provided For :
BATTERY AH RANGE in 4 - steps as above manually selectable - RED, SET AH: RED Flashing during selection
START DISCHARGE / TEST - RED, Flashing during ready (on selection of AH value)
|
|
RESULT
|
|
| |
- HEALTHY - Green led (Battery volts above 11.6VDC at the end of test)
- GOOD - Amber led (Battery volts above 10.8VDC at the end of test)
- WEAK - Red led (Battery volts below 10.8VDC at the end of test)
|
|
FAULT
|
|
| |
1. OVER VOLTAGE: Red led, when more than one batteries are connected in series
2. UNDER VOLTAGE: Red led, When the battery voltage is less than 10 VDC before test.
|
|
| |
|
|
| |
THE METER DOES NOT CARRY OUT THE TEST IF FAULT LED GLOWS
METERING - Digital Meter For measurement of Battery Voltage.
|
|
|
Weight: 1.2 Kg
|
|
Dimensions: 250 (H) X 140(W) X 50(D)mm
|
|
Enclosure: IP-20, CRC Sheet, Powder coated.
|
|
Input output Connection : 0.5 meter Cable Pair with large crocodile clamps.
|
|
Operating Temperature Oo C to 50o C
|
|
Storage Temperature - 10o C to +70o C
|
|
Cooling Convection, Natural.
|
|
Humidity < 95% RH
|
- Enhancement to the above specifications & Customizing can be onsidered on request
|
- Specifications may or can be altered without notice as per company's continuous improvement Program
|
;)