PEW End Suction Pumps are non- self-priming single-stage, centrifugal volute pumps with axial suction port, centrally placed radial discharge port and horizontal shaft. Volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suction lift characteristics. Most modern and highly sophisticated machinery and technology are engaged in manufacturing these pumpsets, using quality raw materials, dynamically balanced impellers and rotors to ensure long life.These pumpsets are powered by a totally enclosed fan cooled AC Induction two pole motor suitable for continuous duty with main dimensions complying with IEC standards. Motor stator is made of low watt-loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the pumps. End-suction centrifugal pumps are applicable for water supply, industrial pressure boosting, industrial liquid transfer, HVAC (heating, ventilation and air-conditioning), fire-fighting and irrigation.
FEATURES
Single shaft for motor and pump ensures good mechanical strength.
Dynamically balanced rotating parts such as impeller and rotor. Bronze impeller available on request.
Graphite coated asbestos packing rope is used to increase bush life.
SPECIFICATIONS
Power Range 0.37 kW - 11 kW (3HP-15 HP)
0.37 kW - 7.5 kW (3HP-10 HP) – MS Series
Speed 2880 RPM
Versions Three Phase: 350 - 415V, 50Hz, A.C. Supply
Single Phase: 180 – 220V, 50Hz, A.C. Supply
Degree of protection IP 44
Class of Insulation A, E, & B
Direction of rotation Clockwise viewed from Driving end
Type of Duty S1 (Continuous)
MATERIAL OF CONSTRUCTION
Part Name: Material
Pump Casing:Cast Iron
Motor Frame: Cast Iron
Impeller: Cast Iron / Bronze
Shaft: Mild Steel
Sealing Gland Rope
Motor Frame: Cast Iron
Pumps : Centrifugal > Monoblock > CMB - MS Series
Pressure Boosting System Pumps - Specification
Power Input Range: 0.37 to 7.5 kW
Speed 2900 RPM
Degree of protection: IP 55
Insulation: Class F
Versions: Single Phase: 230V, 50Hz, A.C. Supply Incorporated with Thermal over load protector.
Three Phase: 380-415 V, 50 Hz, A.C. Supply
Sealing Mechanical Seal
Direction of rotation Clockwise viewed from driving end
Type of duty S1 (continuous)
Nominal Suction x Delivery
size in mm
25 x 25, 32 x 32,40 x 40, 65 x 65