;)
i-CP
Overview
i-CP pumps dimensionally conform ISO:2858. These pumps are horizontal, radially-split, single stage, centrifugal end suction volute with top centreline delivery. The pump feet are integrally cast with the delivery casing. The impeller is of enclosed type. The pump shaft is supported by pre-lubricated anti friction sealed bearings as a standard scope of supply. These are widely used in Chemical industries, food and beverages industries, off sites of petro chemicals and refineries.
Feature
Pump without mechanical seal & without gland packing arrangement
Sealing/flushing water not required
Self venting design
Pump with back pull out design
Conforming to ISO 2858 standard
Pump is sturdy yet light in weight
Shaft is fully protected from liquid
Widely interchangeable components
Models available in 1450 & 2900 RPM
Application
iCP Pumps suitable for:
Light chemicals like caustic soda, weak acids etc.
Food & Beverage industries (Sugar, Vegetable oils, etc.)
Hot water, Brine, DM water, Lime water, etc.
Specification
Delivery up to 180 m3 /hr
Head up to 55 m
Temperature up to 95 °C
KPD, KPD-QF
Overview
These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.
Feature
Conforming to DIN 24256 and ISO 2858
Back pull-out design
Generally conforming to API 610
Gland Packed / Mechanical Seal
Also available in vertical execution
Application
Air-Conditioning
Condensate Extraction
Distilleries
Edible Oil, Sugar, Textile and Process Industries
Water Treatment Plants
Specification
Delivery size up to 200 mm
Capacity up to 2200 m³ /hr
Head up to 150 m
Temperature up to (-) 50 °C to 350 °C