Sparkler Type Filter Press
STANDARD FLOW TYPE : The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (Paper/fabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid. However if required, the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance.
| Model |
Dia. of Plates
|
No. Of Plates |
Filtering Area m2
|
Cake holding Cap. (Ltrs)
|
Flow Rate/Hrs
|
Size of Pump
|
Motor HP
|
|
BPSF - 8
|
8”
|
6 Plates
8 Plates
|
-
|
0.216
0.278
|
4.9
6.3
|
600
700
|
½”
½”
|
1 HP
1 HP
|
|
BPSF - 14
|
14”
|
8 Plates
10 Plates
12 Plates
|
-
|
0.75
0.92
1.04
|
22.5
27.5
32.5
|
1500
1800
2000
|
1”
1”
1”
|
2 HP
2 HP
2 HP
|
|
BPSF - 18
|
18”
|
10 Plates (S)
15 Plates (S) 23 Plates (S)
8 Plates (D)
12 Plates (D)
|
-
|
1.595
2.30
3.48
1.305
1.885
|
30
44
66
54
78
|
3000
4500
7000
2500
4000
|
1 ½”
1 ½”
1 ½”
1 ½”
1 ½”
|
3 HP
3 HP
3 HP
3 HP
3 HP
|
|
BPSF - 24
|
24”
|
12 Plates
15 Plates
18 Plates
24 Plates
|
3.3
4.064
4.8
6.3
|
105
130
153
202
|
5000
7500
9000
12000
|
-
|
2”
2”
2”
2”
|
5 HP
5 HP
5 HP
5 HP
|
| Note – In model 18 Filter Plates S = Sallow Type & D = Deep Type Plates |
|
SALIENT FEATURES :
• Manufactured in S.S. 304 / S.S. 316 / S.S. 316L M.O.C
• M.S / S.S. Jacket can be provided for hot filtration .
• Gives crystal clear filtration by filtering particles up to 1 micron size.
• Scavenger arrangement to remove all the liquid.
• Cake can be dried either by compressed air or by insert gas, steam.
• Filtration rates from 600 Ltrs/hr. to 30000 Ltrs/hr possible depending on the models.
• Centrifugal / Gear / Lobe pumps can be offered, which can also be used for liquid transfer.
• Sample collecting device & safety valve provided. |
|
;)