DESCRIPTION
<div class="\\" pds"="">
ADVANTAGES
Very strong repair material
The repair mortar paste is non slump
Repair as can be put to use faster
DIRECTION FOR USE
Surface Preparation:
with a epoxy resin systems.surface preparation is of prime importance. For concrete surfaces, remove a grease, oil, dust laitence etc. Ensure substrate to receive the screed is sound, cut back to sound surface wherever necessary.
Priming:
Remove dust and ensure the surface is dry. Prime with Master Prime-CN/Master Bond
Mixing:
Mixing a suitable pan type of a mixer consisting of 720 gms Base and 230 gms of React or components and to this add and mix 2 Kg quartz ban mill powder and quartz and 30 180 in 1:1 proportion. Mixing a suitable pan type of a mixer
Application:
Master Patch NS mortar thus prepared Ioo~ like as tiff paste. Apply them mixed Master Patch Ns mortar on to the primed surface while it is still tacky, and feather edge it to restore the original shape of the structural member.
COVERAGE
A mix of 1 kg of base & reactor with 2 Kgs of quartz mix (i.e.1 kg of ball mill powder and 1 kg of 30180 Quartz sand) gives a epoxy non slump mortar 1.5 Iitres.This covers an area of about 5 Sq. ft. if applied to a thickness of 3 mm.
HEALTH AND SAFETY
Epoxy products generally cause irritation to the skin.Use of hand gloves by the workers is advised. Upon completion of day's work all the packing materials should be burnt and buried.
PACKING
Master Patch NS is supplied in 250 gms and 1 kg pre weighed units.
SHELF LIFE
6 mths from the date of manufacturers.
QUALITY ASSURANCE
All “PERMA” branded products are manufactured under strict quality control supervision as per exact manufacturing specification. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact the nearest Perma staff or distributor.
STATEMENT OF RESPONSIBILITY
Perma branded products when used in accordance with its current published directions for use performs as per its data sheets / catalogue. The manufacturer and the distributor will not be responsible for other materials and conditions of inferior workmanship.